A whole house water filter should not reduce water pressure since it filters out all contaminants that could cause water pressure problems. Whole house water filtration minimises the number of bacteria and other harmful organisms in the water to be safe to drink. Still, it does not improve the quality of the water. If the whole House Water filter is installed correctly, it does not reduce water pressure.
Contents
Why Does a Whole House Water Filter Affect Flow Rate?
Whole house water filters are designed to remove impurities and contaminants from your water supply. However, they can also reduce the flow rate of your water system. If your water pressure is low, you may notice that the water flow rate is lower.
A whole house water filter has several components designed to remove impurities from your water supply. These components include a pre-filter, carbon block, activated carbon and ultraviolet light.
The pre-filter is installed before the main filter and removes particles too large to be removed by the main filter.
The carbon block is installed after the main filter and removes chlorine and other chemicals from the water.
The activated carbon is installed in the water tank and removes chemicals dissolved in the water.
The UV light is installed in the outlet pipe of the water tank and removes bacteria and other microbes that can cause health issues.
How Does a Whole House Water Filter Affect Flow Rate?
A whole house water filtration system reduces the amount of impurities and contaminants in the water. When the water is filtered, the water pressure is reduced. This reduction in water pressure can be noticeable if the water pressure is already low. If your water pressure is low, the flow rate will be lower than normal.
Factors That Affect Water Pressure After Installing a Whole House Filter
The following factors can affect the flow rate of a whole house filter system:
The size of your home:
If your home is a small apartment or condo, you may only need a 2-3 gallon whole house filter. However, if you have a large house, you will need to install a whole house filter with a flow rate of 5 gallons per minute or greater.
The size of your pipes:
You will need to install a whole house filter in your home to filter your water properly. If your home has small pipes, you will need to install a whole house filter with a flow rate of 5 gallons per minute or greater. However, if your home has larger pipes, you may need a whole house filter with a flow rate of 7 gallons per minute or greater.
The model of the whole house filter you have selected:
A whole house filter with a 5 gallons per minute or greater flow rate will provide a clean, freshwater supply. However, you will have to replace the filter every three months. A whole house filter with a flow rate of 7 gallons per minute or greater will allow you to filter your water for a year or longer.
How do I increase the water pressure in my water filter?
The best way to increase the water pressure is to buy a better Water filter, but if that’s not possible, here are a few things you can try. First, make sure you have clean and fresh water flowing through your home. Use a water softener if you have hard water and filter it with a water filter. Second, if you’re still experiencing problems, here are a few solutions. Increase the power of your pump to get more water out of your pipes. Run it longer during peak usage times to ensure you have enough water to go around. If all else fails, call a plumber.